Pickguards...

Shodai

Blues Junior
So I liked the way the MIJ came out, and decided I wanted the same treatment for my Squier Bullet. The two problems I had were that it is a Bullet, and dropping a lot of money into a pickguard for a $75 guitar doesn't make a lot of sense. The second issue is that it's a Bullet, and the screw holes don't line up well with pickguards made for American and Mexican strats.

I found a solution. 4 ply Brown Tortoise pickguard and back plate for $12, and no mounting holes:

IMG_20200320_075500263_opt.jpg

I put the original on top and used it to Mark the location for the mounting holes

IMG_20200320_083026224_opt.jpg

Counter sunk the holes by hand to accommodate the screws

IMG_20200320_084508706_opt (1).jpg

Installed, and by golly, another great looking strat!

Screenshot_20200320-092946.png

And since I had to drill the holes myself, the fit is absolutely perfect.

IMG_20200320_071317866_opt.jpg
 

Shodai

Blues Junior
So, on another thread there was talk about switching out pickups and such. Working remotely from home has left me with a little time on my hands, and with the various delivery services still operating...

So the Squier Bullet came out nicely. But it's a Bullet, and the pickup are about the cheapest things on the planet. Weak, and microphonic. So I ordered some Wilkinson's from the Stratosphere, and some cream colored covers & knobs. Pickups are about twice the output. They're lower cost ceramic Wilkinson's, so by far not the greatest in the world, but a world of difference from the cheap pickups that were in there.

I think the cream is a little more subtle against the Tortoise.

IMG_20200325_125841827_opt.jpg
IMG_20200325_134442347_opt (1).jpg
IMG_20200325_143802158_opt~2.jpg
 
Last edited:
Top