Amps Boneyard list, 1st in line. Classic 30

CapnDenny1

CapnDenny1

Student Of The Blues
A few days ago I took a picture of my amp boneyard. I decided to make a list. I had a co-worker who askedif I had and amps for sale. So I went and made a list. Most of these were ebay or craigslist buys.

Peavey. Classic 30 tweed
Peavey Studio Pro 112
Fender Deluxe 112 PR 205
Carvin Nomad 30
Ampeg Jet 12T
Hughes & Kettner Tubemeister 18 head
Egnater. Tweaker 40 head
Fender Hot Rod Deluxe missing back
PRS Sonzera 20
PRS Sonzera 50
Blackstar HT-5 head
VOX ADT15VT
Ampeg VT-60
Yamaha THR5A
JMF Spectra 30T
Carvin BX500
Ampeg SVT-400T
Fender Acoustasonic 100
Randall RB-100
Marshall MG-100

Fender Bassman 100T
Ashdown MAG 300H. - lights up but no ouput.
Hartke HA3500C - powers on no sound.

Fender 65 Twin Reverb Reissue no cab
Egnater Tweaker 15 head, no cab
Blackstar Artist 30. No cab
Fender Hot Rod Deluxe III No cab
Fender Hot Rod Deluxe. No cab
VHT Lead 20
Fender Deluxe 90
 
CapnDenny1

CapnDenny1

Student Of The Blues
And the winner is

Peavey Classic 30 in combo in tweed. It looks nice, and even had a full set of tubes, and all the knobs!

I went back and looked up the issue, and they said it worked, but got scratchy sometimes.

I checked the tubes. Seemed ok, a couple of the 12ax7’s were low output, but they probably worked ok.

I pulled the boards out and gave them a look over. I spotted this,

02B1E185-C75B-4CE7-864A-3EAD31D45C29 by Dennis Kelley, on Flickr

See the cap that’s sideways? I looked on the schematic. It’s R8, which is in series with the signal from the input jack to the first tube.

0B40297C-2D1C-4A0E-9D84-366906C41678 by Dennis Kelley, on Flickr

The back side looks like it’s still soldered? So I removed the solder and made ure the leads both went thru the pcb, and soldered. I also touched up the tube sockets. Didn’t test it yet.
 
You must log in or register to reply here.
Top